BORIMOL FOLIAR BORON & MOLYBDENUM FERTILISER
BoriMol – Foliar Boron & Molybdenum for Arable and Field Vegetable Crops
BoriMol Foliar Boron & Molybdenum Use:
BoriMol is a high-availability foliar boron and molybdenum fertiliser developed to correct boron deficiency and supplement key micronutrients from the early stages of foliar growth and crop development.
It combines boron with molybdenum to support the performance of liquid boron nutrition programmes, particularly where molybdenum availability may be low. BoriMol is suitable for use across arable and field vegetable crops as a foliar spray within crop production programmes
Key benefit:
Supports boron nutrition, growing points and crop development
BoriMol provides a concentrated foliar source of boron, supported by molybdenum, to help maintain healthy crop development, strong cell walls, sugar movement and new root and shoot growth. This makes it particularly useful where boron demand is high or where foliar boron correction is required.
Benefits:
- Helps correct boron deficiency.
- Provides boron and molybdenum in one foliar formulation.
- Supports strong cell wall and membrane formation.
- Helps facilitate sugar transport for plant energy.
- Supports cell division in new roots and shoots.
- Useful as a supplementary foliar treatment within crop production programmes.
- Molybdenum can support the performance of ethanolamine-based boron formulations.
- Suitable for all arable and field vegetable crops.
- Applied as a foliar spray from the early stages of foliar growth.
When and where to use:
BoriMol should be applied as a foliar spray when there is sufficient leaf area for uptake. It is suitable from the earliest stages of foliar growth and crop development, where boron and molybdenum are required.
For best nutrient uptake, apply in the early morning or evening. Avoid spraying when crops are stressed by very hot weather or drought.
Crops:
All arable and field vegetable crops, including oilseed rape, brassicas, beet, potatoes and other crops where boron and molybdenum are required.
Pack Size:
10 L, 1000 L (IBC)
Technical Information – BoriMol
BoriMol is a liquid foliar fertiliser containing boron and molybdenum. It has been developed as a high-availability source of both micronutrients for foliar application from the early stages of crop growth and development.
Boron is essential for strong cell walls and membranes, sugar transport and cell division in new roots and shoots. The inclusion of molybdenum alongside boron can support the effectiveness of liquid boron applications, particularly where molybdenum availability is low
| Analysis | w/v% | g/L |
| Boron (B) | 15.0 | 150.0 |
| Molybdenum (Mo) | 0.04 | 0.40 |
Application – BoriMol
General application guidance
- Apply as a foliar spray when sufficient leaf area is present.
- Use from the earliest stages of foliar growth and crop development.
- Apply in the early morning or evening for best nutrient uptake.
- Do not spray when crops are stressed by very hot weather or drought.
- Shake the container well before opening and use.
- Ensure spray equipment is clean before adding product.
- Half-fill the spray tank with water.
- Begin agitation and add the required quantity of BoriMol to the tank.
- Rinse the container thoroughly and add the rinsings to the sprayer.
- Continue agitation until spraying is complete.
- Spray without delay once mixed.
- Do not leave products in the tank for long periods.
- When used alongside pesticides, mix BoriMol into the tank last.
| Crop | Timing | Rate |
| All arable and field vegetables crops | Earliest stages of foliar growth and crop development. |
0.5-3.0 L/ha in 220-400 L water/ha |
COMPATIBILITY
- Compatible with a wide range of agrochemical products, subject to compatibility checks and agronomic advice.
- For compatibility details, contact your distributor or Emerald Research representative.
- Carry out a jar test before adding to a new tank mix.
MSDS Sheet – BoriMol
For all MSDS sheets please e-mail your request to [email protected]
Product Label – BoriMol
Frequently Asked Questions – BoriMol
1. What is BoriMol used for?
BoriMol is used as a foliar boron and molybdenum fertiliser to help correct boron deficiency and support crop development from the early stages of foliar growth. It can also be used as a supplementary foliar treatment within crop production programmes.
2. Why does BoriMol contain molybdenum as well as boron?
Molybdenum is included because it can support the performance of liquid boron formulations. Where molybdenum availability is low, the effectiveness of liquid boron applications may be reduced.
3. What rate of BoriMol should be used?
The label rate is 0.5–3.0 L/ha in 220–400 L water/ha, applied from the earliest stages of foliar growth and crop development.
4. Can BoriMol be tank-mixed with pesticides?
BoriMol is compatible with a wide range of agrochemical products, but a jar test should be carried out before adding it to a new tank mix. When used alongside pesticides, BoriMol should be mixed into the tank last.
Related Products
For further product information, quantities, pricing and delivery questions, please use the contact form below and we will get back to you.
OptiYield generates effective full-lifecycle crop programmes, utilising our library of unique bioactive products.
OptiYield delivers 10-30% marketable yield increases in high-value crops for our farmers & growers.